Largest Workpiece
Ghost Gunner 3 |
Linear Travel (X) 86.5mm
Linear Travel (Y) 241.5mm
Linear Travel (Z) 78.5mm
Total Cutting Volume 1639.85mm
Ghost Gunner 2 |
Linear Travel (X) 75mm
Linear Travel (Y) 170mm
Linear Travel (Z) 60.5mm
Total Cutting Volume 771.38mm
The maximum cutting range in the Ghost Gunner 2 is 180mm wide, 56mm high, 63mm deep. The GG2 t-slot table can accommodate a workpiece no more than 250mm in width. The distance between the center of the t-slot rails is 40mm. The distance between the front and back edges of the t-slot table is 64mm.
Note | The clear plastic chip cover can be removed for certain projects. Wearing protective eyewear and a dust mask is recommended. The workpiece can protrude from the front of the Ghost Gunner if the part is mounted high enough and programmed so that the table does not move down to collide the part into the front of the enclosure.
Comments
0 comments
Please sign in to leave a comment.