Windows
Downloading
Download XLoader.(Click the download arrow button đź ź in the upper right corner to download.)
Download the hex file zip folder, then unzip to find the .hex file.
GG1 & GG2 control board: download DD2V7.zip
GG3 control board: download 328p20200512.zip
From USB
XLoader is located in Ghost Gunner\Firmware\XLoader\ on DD USB drives.
Use XLoader to install firmware on the Ghost Gunner’s control board if you have trouble loading firmware through DDCut.
1: Plug in Ghost Gunner
2: Click to run XLoader.exe as shown above
3: Select the firmware version you want to upload.
Ghost Gunner 1 & 2 | DD2V7.hex
Ghost Gunner 3 | 328p20200512.hex
4: Select the COM port for your GG.
5: Verify baud is 115200.
6: Verify device is "Uno(ATmega328)".
7: Click Upload.
Mac
Downloading
Download and install Arduino app. https://www.arduino.cc/en/Main/Software
Download and install HexUploader. https://drive.google.com/file/d/1rj0Gek7Oc3bupRiRK8z9hxAPX-d9sjOZ/view?usp=sharing
GG1 & GG2 firmware: download DD2V7.zip
GG3 firmware: download 328p20200512.zip
1: Plug in Ghost Gunner.
2: Open HexUploader.
3: Select your type of Arduino. "Uno(ATmega328)"
4: Select your device port.
5: Click “Upload a Hex File” and select the firmware version you want to upload.
Ghost Gunner 1 & 2 | DD2V7.hex
Ghost Gunner 3 | 328p20200512.hex
6: Done! You should see some text flash by as the hex file is uploaded, ending in “Success! Or similar.
Comments
0 comments
Please sign in to leave a comment.