Feedrate Percentage Option

DDcut V Feedrate Percentage

Changing the feedrate is not recommended and should only be attempted by experienced users. Enabling the feedrate percentage option in DDCut's settings presents a risk of damaging components.

     Caution | Changing feedrate may result in timeout errors when running milling programs.

Click the Settings button in the lower right corner of DDCut's main menu to access the feedrate override options.

Select Adjustable 30%-100% or 30%-300%

Then click save changes. 

Start running your cutting code as you normally would. 

Once the probing or milling start, you will see a slide bar at the bottom of the screen. 

Use this to change the feedrate on the machine on demand.